Replies to This Discussion

Permalink Reply by kohtut on December 29, 2011 at 10:45am

How about Net-Info and CiscroNet for CCNA ? As they advertised, they have  routers and switches for lab.

• ▶ Reply

Permalink Reply by Thurein on January 7, 2012 at 12:45pm

For me, Compu-Tech was the very first training class(A+) I happened to attend when I was not able to identify computer's parts correctly. Now, over 6 years later,  I still can't point out the parts correctly. :D

But I do know how to be honest with technologies. I do know how to admit that you don't know about sth. I do know how to share knowledge with other. I do know how to be modest. Compu-Tech taught me those.

Regards,

TRA

• ▶ Reply

Permalink Reply by Thurein on January 7, 2012 at 12:56pm

Linux - Resources

http://www.linuxhomenetworking.com/ (Non-Distro Centric)

http://server-world.info/en/ (Both Debian-based and Red-Hat Based)

http://www.howtoforge.com/ (Highly Practical Tutorial for SMB and Enterprise Enviroment)

http://ubuntuguide.org/wiki/Ubuntu:Oneiric (Ubuntu Specific)

http://wiki.centos.org/HowTos (CentOS Specific)

http://www.cyberciti.biz/ (Snippets)

Hope it be useful for learners.

Regards,

TRA

• ▶ Reply

Permalink Reply by Kaung Wai Phyo on January 14, 2012 at 11:41pm

Do self-study if possible. Jux take training for basic knowledge and foundation only.

• ▶ Reply

Permalink Reply by pyiphyomgmgsoe on January 21, 2012 at 1:22am

If anyone want to interest cisco pls look for good teacher who know theory very well and worked in practical field. The main important thing is looking for good teach to build basic theory and concept how to study further and then self-study is very sweet.>>>> I want to attend cisco class last one year ago. I was looking and i got one class which has a lot of cisco real devices (switch and router). At that time it is not good teacher there. Even our center has a lot of device i don't know how to try with cisco device. I am going on Static Route and RIP a few month. :P . After 3 months ago i got good teacher in that center. I got a lot of cisco inter-networking knowledge from him. And then i passed CCNA very well. Before I got CCNA i meet another good teacher who has a lot of cisco experience in ISP and got CCIE Written at that center. Last 2 month ago i have to plan to sit CCNP Exam. I got a lot of help from him.  He teach me a lot of wonderful thing with real device. We teach CCNP routing within one week the whole day but i can get very well.  I don't have any money to spend :).  And then he teach me also switching. IPs VPN and QoS also with real device. I will sit CCNP routing and switching in next month. I am ready to sit routing but have to study switching a few thing.

• ▶ Reply

Permalink Reply by pyiphyomgmgsoe on January 21, 2012 at 1:56am

ႏွစ္စံုထဲလားဗ်ာ နည္းတာေပါ့ . . . ကၽြန္ေတာ္သင္ေနတဲ့သင္တန္းမွာ အားလံုးေပါင္း Switch နဲ႕ Router အလံုး ၅၀ ေလာက္ရွိတယ္. . . Layer 3 Switch(3560, 3550 ငါးလံုး) ေတာင္ရွိတယ္ . . . :) Frame-relay switch လည္း ႏွစ္လံုးရွိပါတယ္ . . . CCNA တန္းေလာက္က ဘာ Real Device မွ မလိုပါဘူး . . . ရွိရင္ေတာ့ေကာင္းတာေပါ့ . . . TFTP စမ္းတာ နဲ႕ password recovery စမ္းတာ ေလာက္ေလးဘဲလိုမယ္ထင္ပါတယ္ . . . GNS3 ကလည္း ေတာ္ေတာ္မ်ားမ်ားလုပ္လို႕ရတာဘဲ . . . CCNP routing ေလာက္ေတာင္ ေအးေအးေဆးေဆးသင္လို႕ရပါတယ္ . . . ခက္တာက CCNP Switching မွာ private vlan ေတြလုပ္မွ real device ေတြလိုလာမွာ . . . Layer 3 3560 မရွိရင္ေတာင္ layer 3 3550 ကို Ipservice IOS နဲ႕ မွ စမ္းလို႕ရမွာေလ . . . ကၽြန္ေတာ္အျမင္ကေတာ့ စစခ်င္း real ေတြနဲ႕ မစမ္းဘဲ packet tracer တို႕ GNS တို႕နဲ႕ မြတ္ေနေအာင္စမ္းထားၿပီးမွ Real ေတြနဲ႕ စမ္းတာ ပိုေကာင္းမယ္ထင္ပါတယ္ . . . packet tracer က real နဲ႕ ေတာ္ေတာ္ကြာေပမဲ့ GNS 3 ကေတာ့ Emulation ဆိုေတာ့ ေတာ္ေတာ္မ်ားမ်ားတူပါတယ္ . . .အမ်ားႀကီးစမ္းလို႕ရပါတယ္ Routing အတြက္ . . .


normajean86 said:

i-Beam ေကာင္းတယ္ဗ်။။ Cisco Router နဲ႕Switch အစစ္ႏွစ္စုံစီရွိတယ္ဗ် ။.မိုက္တယ္။။ Bagan & MPT မွာေတာင ္ေကာင္းေကာင္းရွိရဲ့လားမသိပါဘူးဗ်ာ။.

• ▶ Reply

Permalink Reply by Zaeyer Myo Nyunt on February 8, 2012 at 2:14pm

http://www.ciscronet.com/

• ▶ Reply

• ‹ Previous
• 1
• …
• 5
• 6
• 7
• Next ›
• Page